Recycled PET Flakes Extrusion Line Embossed Strapping Belt
Roll Machine For 9-32mm
PRODUCT DESCRIPTION OF PET STRAP MAKING MACHINE
PET Strap Making Production Line Character
PET packing strap is widely used, replaced for steel strap for
packing application internationally, because of its good tensile strength, flexible, low prolongation rate, good
performance of high temperature resistant, non-rustiness, and low use-cost, etc, it is used in steel,
construction material, chemical fiber, paper making, tobacco, agriculture, election, etc.
| Item | Quantity |
| 1. Single screw extruder | 1set |
| 2. auto-loader and drying device | 1set |
| 3. Mould&screen changer | 1set |
| 4. Cooling water tank | 1set |
| 5. the first haul-off | 1set |
| 6. stretching oven | 1set |
| 7. the second haul-off | 1set |
| 8. embossing machine | 1set |
| 9. the third haul-off | 1set |
| 10. calibration water tank including dehydrator | 1set |
| 11. Winder | 1set |
APPLICATION & FEATURES OF PET PACKING STRAP MAKING MACHINE
Characteristic of our PET packing strap machine:
1. The raw material treatment is by our CSG serious dehumidify and
dryness system, it ensures the
humidity in raw material less than 80PPM.
2. Closed circulation feeding system prevent the material from
exposure on air to keep the dryness of raw
material.
3. The screw is specially designed for PET application, it consists
of separate and mixing part to keep the
even plastication, also by fixed material feeding system, the
extrusion is stable, which ensures the good
dimension of PET strap.
4. The machine can produce 1/2/4 strap at the same time.
5. The mould is specially designed, equipped with two-stage filter.
6. Constant temperature heating device provide even cooling
environment for PET strap to raise the tensile
strength performance.
7. Anneal treatment for finished PET strap to remove the part
remaining stress to keep good shape.
ABOUT PLASTIC STRAP MAKING MACHINE
• Choice of single or twin screw extruder.
• Production can use 100% recycled material to obtain a high add
value commodity like strapping band.
• PLC manages automatically the extruder's working parameters in
according with the running condition;material treatment
,extrusion,stretching,annealing and taking up units are all synced
with the PLC.
• All components are controlled and monitored through PLC.
• PET or PP straps can be produced with the same technology,to
change line set-up from one to the other only take in few minutes.
• High-advanced ABA co-extrusion technology,not only improve
strap's tensile strength but also help the peel strength after
welding.
• Double column 4 positioned filter chambers,100% full automatic
self-cleaning screen changer,working non-stop during
screen changing,it ensures the straps quality is not affected
throughout the production.
• Choice of ordering one,two,four straps production line.
• Choice of either servo or torque motor for winding machine
